单片机8051电梯滚动显示(编写字库).pdfVIP

电梯滚动程序 #includereg51.h #includeintrins.h #define uchar unsigned char #define uint unsigned int sbit PA=P1^0; sbit PB=P1^1; sbit PC=P1^2; sbit PD=P1^3; uint i,j=0; void delay(uint z); void jiantou(uint); void jiantouxia(uint); void xianyi(); void xianer(); void xiansan(); void xiansi(); void xianwu(); void xianliu(); void xianqi(); void xianba(); void xianjiu(); void mie(); void main() { while(1) { for(i=3000;i0;i--) { if(j==0) xianyi(); //进入主程序后先显示“ 1” j=0 时显示“ 1”