替代料逻辑与PLMSAP作业方式.pptVIP

替代料邏輯與PLM/SAP作業方式 Concept RD set inter-replaceable part within one group Part will be inter-changed in the same group SAP will automatically choose part according to the ATP of parts. Expected Benefits Better material utilization and control Fully utilize the replaced parts. Increase material turnover rate Replaceable parts use automatically Decrease ECO numbers RD maintain the replaceable relationship between parts Multi-site production with one time setting Minimal part preparation L/T BOM configuration flexibility Board product: Mosfet, TTL/CMOS IC, Diode, Transistor… System product: HDD, ODD, Memory… ECOM Analysis If demand is 20, substitute will be If demand is 30, substitute will be PLM系統建立替代料作業方式 透過ECOP或ECOM 來定義專案用料之替代關係 ECOP? EVT/ DVT階段的工程變更 ECOM?PVT/ MP 以後的工程變更 ECOP/ ECOM替代關係之設定 Key fields: Find num, Qty, Ref Des (Location). Find num (Group): define the Alternative Group (1~256) Primary Item: maintain Qty Ref Des Alternative items: Qty=0 Ref Des keep Empty Milestone Review Notice ECO Cut in implement “Running change” definition For those running change can’t be substitute NOT to set the substitute relationship in BOM. controlled by PMC manually. For the running change can be substitute and no concern to the current or next batch Just leverage the substitute function can achieve the purpose. Select Reason Code as “Company Policy” For the ECOM only set substitute part relationship, please select reason code as company policy and attach test report. Notice As T product BOM is saved from standard product, if the substitute part relationship needs to be removed in T product, PM should clearly mark it in T product EXCEL sheet. Then, PE may create correct BOM according to the Excel sheet. Substitute part rule (1/2) Due to R/C parts have already at least 1 second source approved in the same part number, it is not necessary to use the function again unless single source part like NOKIA project. Following part category including L, Mosfet, TTL/CMOS IC, Diode, Tr