c1288-96中文版-单块非石棉纤维水泥内饰基板的标准规范.docVIP

C 1288 PAGE 861 Designation: C 1288 - 96编号：C 1288 - 96 PAGE 860 Standard Specification forDiscrete Non-Asbestos Fiber-Cement Interior Substrate Sheets1单块非石棉纤维水泥内饰基板的标准规范 This specification is under the jurisdiction of ASTM Committee C-17 on Fiber Cement Products and is the direct responsibility of Subcommittee CI 7.02 on Non-Asbestos Fiber Cement Products. This specification is under the jurisdiction of ASTM Committee C-17 on Fiber Cement Products and is the direct responsibility of Subcommittee CI 7.02 on Non-Asbestos Fiber Cement Products.本规范受ASTM委员会C-17纤维水泥制品委员会管辖，并且由C17.02非石棉纤维水泥制品分委会直接负责。 Current edition approved Aug. 10, 1996. Published September 1996. Originally published as C 1288 - 95. Last previous edition C 1288 - 95.现行版本于1996年8月10日批准，并于1996年9月出版。最初版本编号为C1288-95，上一版本编号为C1288-95。 This standard is issued under the fixed designation C 1288; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C 1288刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope适用范围 This specification covers discrete non-asbestos fiber-cement sheets manufactured to be dimensionally stable and suitable for decoration as paint, wallpaper, natural stone, tile, or resilient flooring in internal wet and dry areas.本规范包含制造尺寸稳定及适合做油漆、壁纸、天然石、瓦或内潮弹性地板和干燥区装饰的单块非石棉纤维水泥薄板。 This specification is not applicable to asbestos-cement flat sheets (Specification C 220), non-asbestos fiber cement flat sheets for exterior applications such as claddings, facades, curtain walls, and soffits (Specification C 1186), gypsum backing board and coreboard (Specification C 442), water-resistant gypsum backing board (Specification C 630), glass mat gypsum backing board (Specification C 1178), particle boards (Definiti