c1384-98a中文版-砌筑砂浆改良剂的标准规范.docVIP

C 1384 PAGE 918 Designation: C 1384 -98a编号: C 1384 -98a PAGE 917 Standard Specification for Modifiers for Masonry Mortars This specification is under the jurisdiction of ASTM Committee C-12 on Mortars and Grouts for Unit Masonry and is the direct responsibility of Subcommittee C12.09 on Modified Mortars.本标准归ASTM C-12砌块用灰浆和水泥浆委员会管辖，并由C12.09 改良灰浆小组委员会直接负责。Current edition approved Dec. 10, 1998. Published January 1999. Originally published as C 1384-98. Last previous edition C 1384-98.现行版本于 This specification is under the jurisdiction of ASTM Committee C-12 on Mortars and Grouts for Unit Masonry and is the direct responsibility of Subcommittee C12.09 on Modified Mortars.本标准归ASTM C-12砌块用灰浆和水泥浆委员会管辖，并由C12.09 改良灰浆小组委员会直接负责。 Current edition approved Dec. 10, 1998. Published January 1999. Originally published as C 1384-98. Last previous edition C 1384-98.现行版本于1998年12月10日批准，并于1999年1月出版。最初版本编号为C1384-98，上一版本编号为C1384-98。 This standard is issued under the fixed designation C 1384; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C1384 刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope 适用范围 This specification pertains to modifiers for masonry mortars. Modifiers are used to improve one or more of the recognized desirable properties of conventional masonry mortar.本标准适用于砌筑砂浆改良剂。改良剂用于提高传统砌筑砂浆的一个或多个公认的理想性能。 Acceptance of a modifier is based on its performance in a modified mortar. Acceptance of the modified masonry mortar is based on attainment of performance either equivalent to that required for conventional mortar or improved performance of one or more indicated properties, while maintaining required performance levels for other properties.改良剂能否被接收取决于被改良的砂浆的性能如何。被改良的砌筑砂浆能否