c444m-95中文版-多孔混凝土管标准规范［米制］.docVIP

C 444 PAGE 269 Designation: C 444M – 95编号: C 444M METRIC米制 PAGE 266 Standard Specification for Perforated Concrete Pipe[Metric] This specification is under the jurisdiction of ASTM Committee C-13 on Concrete Pipe and is the direct responsibility of Subcommittee C 13.01 on Nonreinforced Concrete Sewer, Drain, and Irrigation Pipe.本规范由ASTM委员会C-13混凝管委员会管辖，并由C13.01无筋混凝下水管、疏水管、灌溉管分委会直接负责。Current edition approved June 15, 1995. Published August 1995. Originally published as C 444M - 80. Last previous edition C 444M - 94.现行版本于1995年6月15日批准，并于1995年8月出版。最初版本编号为C444M-80，上一版本编号为C 444M-94。 多孔混凝土管标准规范［米制］1 This standard is issued under the fixed designation C 444M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C444M刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε) This specification has been approved by the Department of Defense. Consult the DoD Index of Specifications and Standards for the specific year of issue which has been adopted by the Department of Defense.该标准已经批准被美国国防部机构使用。已被美国国防部采用的该标准出版的具体年份可以查看美国国防部技术和标准索引。 1. Scope适用范围 This specification covers perforated concrete pipe intended to be used for underdrainage.该规范涵盖旨在用于地下排水的多孔混凝土管。 This specification is the metric counterpart of Specification C444.本规范是标准规范C 444的对应米制标准。 2. Referenced Document参考文件 2.1 ASTM Standard:ASTM标准： C 822 Terminology Relating to Concrete Pipe and Related Products Annual Book of ASTM Standards, Vol 04.05.ASTM标准年鉴第04.05卷。 Annual Book of ASTM Standards, Vol 04.05.ASTM标准年鉴第04.05卷。 3. Terminology术语 3.1 Definitions—For definitions of terms relating to concrete pipe, see Terminology C 822.定义-关于混凝土相关术语的定义，请参见术语集 C822。 4. Classification 分类 4.1 Pipe manufactured to this specification shall be of two classes, Type 1 and