c479-95中文版-陶土衬板的标准规范.docVIP

C 479 PAGE 303 Designation: C 479 – 95 编号：C 479 – 95 PAGE 300 Standard Specification for Vitrified Clay Liner Plates This specification is under the jurisdiction of ASTM Committee C-4 on Vitrified Clay Pipe and is the direct responsibility of Subcommittee C04.20 on Methods of Test and Specifications.本规范由ASTM委员会C-4 This specification is under the jurisdiction of ASTM Committee C-4 on Vitrified Clay Pipe and is the direct responsibility of Subcommittee C04.20 on Methods of Test and Specifications.本规范由ASTM委员会C-4陶土管委员会管辖，并由C04.20试验方法和规范分委会直接负责。Current edition approved Oct. 10, 1995. Published December 1995. Originally published as C 479 - 61 T. Last previous edition C 479 - 77 (1993) ε1.现行版本于1995年10月10日批准，并于1995年12月出版。最初版本编号为C479-61T，上一版本编号为C479-77（1993）ε1。 This standard is issued under the fixed designation C 479; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C 479刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope适用范围 This specification establishes the criteria for the acceptance of vitrified clay liner plates used to protectively line or face pipe, culverts, abutments, structures, or appurtenances.本规范制定了用于保护性地排列或抹盖线管或面管、涵洞、桥台、结构或附属物的陶土衬板的验收标准。 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.以英制单位表示的数值视为标准值，圆括号内数值仅供参考。 2. Referenced Documents参考文件 2.1 ASTM Standards: ASTM标准： C 43 Terminology Relating to Structrual Clay Products Annual Book of ASTM Standards, Vol 04.05.ASTM标准年鉴 Annual Book of ASTM Standards, Vol 04.05.ASTM标准年鉴第04.05卷。 C 301 Test Methods for Vitrified Clay Pipe2C301陶土管的试验方法 3. Terminology术语 3.1 Definitions:—Clay, fire clay, shale, and surface clay are define