c497-98中文版-混凝土管道、检查井构件或瓦管的标准试验方法.docVIP

C 497 PAGE 812 Designation: C 497 - 98编号：C 497 - 98 PAGE 793 Standard Test Methods forConcrete Pipe, Manhole Sections, or Tile These test methods are under the jurisdiction of ASTM Committee C-13 on Concrete Pipe and are the direct responsibility of Subcommittee C1 3.09 on Methods of Test.本试验方法归ASTM负责混凝土管道的C-13委员会管辖，并由C13.09试验方法分委会直接负责。Current edition approved June 10, 1998. Published March 1999. Originally published as C 497 - 62 T. Last previous edition C 497 - 97.现行版本于1998年6月10日批准，并于1999年3月出版。最初版本编号为C 497 – 62 T，上一版本编号为C 497 – 97。混凝土管道 These test methods are under the jurisdiction of ASTM Committee C-13 on Concrete Pipe and are the direct responsibility of Subcommittee C1 3.09 on Methods of Test.本试验方法归ASTM负责混凝土管道的C-13委员会管辖，并由C13.09试验方法分委会直接负责。Current edition approved June 10, 1998. Published March 1999. Originally published as C 497 - 62 T. Last previous edition C 497 - 97.现行版本于1998年6月10日批准，并于1999年3月出版。最初版本编号为C 497 – 62 T，上一版本编号为C 497 – 97。 This standard is issued under the fixed designation C 497; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last re-approval. A superscript epsilon (ε) indicates an editorial change since the last revision or re-approval.本标准以固定编号C 497刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后所作的编辑性修改 This standard has been approved for use by agencies of the Department of Defense.本标准已获得批准供（美国）国防部各部门使用。 1. Scope适用范围 These test methods cover testing of concrete pipe, manhole sections, and tile. The test methods described are used in production testing and acceptance testing to evaluate the properties provided for in the specifications.本标准中的这些试验方法涉及对混凝土管、检查井构件或瓦管所作的试验。所述试验方法用于生产试验和验收试验，以对相关制品是否达到规范中所规定的特性做出评估。 The test methods appear in the following order:试验方法按以下顺序列出： Section章节 External Load Crushing Strength外部载荷破碎强度 4 Flat Slab Top平顶板 5 Core Strength芯强