基于UCC28019的高功率开关电源设计.docxVIP

基于UCC28019的高功率开关电源设计 摘 要 电源是现代社会不可或缺的能源之一，在人们的日常生活中，电源具有重要的作用。为了使电源的利用率变高，使电源工作在更高效率的状态，减少能源的损耗，产生了高功率因数电源。功率因数是电源设计技术的一个重要指标，本设计通过采用UCC28019作为主要控制芯片，主电路拓扑采用BOOST升压斩波电路，通过检测输入电压和输入电流进行调整，以达到大大提高功率因数的效果。 本设计包含BOOST升压斩波电路、UCC28019控制电路、保护电路、测量电路、辅助电源模块和STM32单片机模块等组成。传统的AC-DC电源设计的方法是使电网电压通过整流后采用电容滤波得到，这种方法会使电路产生大量的电流谐波和功率因数不高等缺点。本设计成功克服了以上的不足之处，使电源的交直变换的效率更高，也得到更高质量的电源。 关键词：功率因数； STM32单片机； Boost拓扑； UCC28019； 功率因数检测 ABSTRACT The electrical source is one f the indispensible energy in today’s society, the electrical source plays a important role in people’s daily life. In order to improve the electrical source’s utilization, and reduce energy loss, so there is high power factor stabilized voltage supply. And the power factor is one of important indexes in power supply design technology. The design adopts ucc28019 as the main control chip. In this paper the Boost Chopper is proposed as the main circuit topology, this circuit test the input voltage and input current that can adjust the power factor, so it can greatly promote the power factor. This design contains some module, like the Boost Chopper、the ucc28019 control circuit、the protect circuit、the testing circuit、the accessory power supply、the STM32 single chip circuit and so on. The method of traditional AC-DC power design is that rectifying the grid-voltage and adopting capacitance to filter the voltage, this method have two shortcoming, on the one hand it can produce a large number of current harmonics, one the other hand it’s power factor is very low. This design is successful to overcome these shortcoming, it improve the efficiency of electrical source’ AC-DC converter and it can provide high-quality voltage supply. keyword: power factor； STM32 single-chip； Boost Chopper； UCC28019； power factor testing circuit  目 录 1. 绪论1 1.1 课题的研究意义1 1.2 课题的研究背景2 1.3 课题的研究内容2 2. 系统方案论证3 2.1 无源功率因数校正方案3 2.2 有源功率因数校正方案4 2.3 方案选择4 3. 系统原理论证5 3.1 系统框图5 3.2 UCC28019控制电路6 3.3 BOOST升压电路8 3.4 相位检测电路11 3.5 光耦隔离电路15 3.6 辅助电源电路