液压支架的静力分析和模态分析外文文献翻译.docVIP

英文原文 The Structure Statics Analysis and Transient Dynamics Analysis of Hydraulic Support Hongyu Liu School of Mechanical Engineering and Automation University of Science and Technology Liaoning Anshan, Liaoning, China lhy_04@126.com Abstract—Hydraulic support is a key equipment of synthesis mechanization caving coal and safe production in modernization coal mine. This paper took ZT6500/19.5/34 hydraulic support as an example. According to national standard, structure statics analysis and transient dynamics analysis of the type hydraulic support strength test were preceded under base torsion ? working condition by ANSYS software. The relevant total displacement distribution rule and equivalent stress distribution rule of the type hydraulic support prototype were found. The relevant change rules of equivalent stress, equivalent strain, remain stress and remains strain along with time were analyzed. This provides an effective research way on enhancing strength and load bearing capability of hydraulic support. Keywords-hydraulic support; structure statics analysis; transient dynamics analysis; residue stress; residue strain I.INTRODUCTION Hydraulic support is a key equipment of synthesis mechanization caving coal. Now, lots of countries in the world are increasing investment on hydraulic support design, manufacture and research. A new type of hydraulic support must pass hydraulic support prototype type test in special institution appointed by nation and acquire technology authentication eligibility report before it use in China [1]. The structure statics analysis and transient dynamics analysis of hydraulic support were proceeded by ANSYS finite element analysis software. This method can find out the total displacement and the equivalent stress distribution rule of hydraulic support. The characteristic of equivalent stress, equivalent strain, residual stress and residual strain changed with time c