换热站自动控制系统设计外文文献+翻译.pdfVIP

外文文献 ： Designand Implementationof Heat ExchangeStationControlSystem Keywords: Heat exchange station, Control system, PLC, Inverter, Configuration software. Abstract. This paper introduces a design and implementation of heat exchange station control system based on PLC and industrial configuration software, which includes the control scheme and principle, hardware selection and software design, etc. The circulating pumps and replenishing pumps in the system can all be driven automatically by PLC and inverter. Main process parameters, such as steam pressure andmeasurementtemperatureand so on, can all be shown on the industrial PC running configuration software, and instructions could be sent by the engineer and operator on-the-spot via the Human Machine Interface as well. The automatic pressures adjustment of steam supply of the heater by advanced PID algorithm has been realized finally. It is verified that the system is highly reliable and stable, and it greatly enhances the level of automation and pressure control accuracy of the heat exchange station and meets all the equipments running demands well. Introduction With the rapid development of economy and society, heat supply systems are the key power source in the communities and plants in China. As a media between heat sources and heat loads in the systems, a heat exchange stations plays a very important role for the heat supply quality. Traditionally, most of the pumps in the heat supply systems are operated by valves manually, so it could bring about the power energy consuming, high labor intensity and low operation automation. In this paper a design of control system for heat exchange station based on PLC, inverter and industrial configuration software was proposed, accordingly the aim for power energy saving, high heat efficiency and operation automation has been achieved. ProcessoutlineandControldemands Processoutline. The process ou