dinen1024322000钢热模锻件尺寸公差第2部分在水平锻造机器上的顶锻.doc

DEUTSCHE NORM June 2000 Steel die forgings – Tolerances on dimensions Part 2: Upset forgings made on horizontal forging machines English version of DIN EN 10243-2 { EN 10243-2 ICS 17.040.10; 77.140.85 Gesenkschmiedeteile aus Stahl – Ma?toleranzen – Teil 2: Warm hergestellt in Waagerecht-Stauchmaschinen This standard, together with DIN EN 10243-1, June 2000 edition, supersedes DIN 7526, January 1969 edition. European Standard EN 10243-2 : 1999 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by ECISS/TC 28. The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Steel and Iron Standards Committee). Amendments DIN 7526, January 1969 edition, has been superseded by the specifications of EN 10243-1 and EN 10243-2. Previous edition DIN 7526: 1969-01. Continued overleaf. EN comprises 33 pages. ? No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). Ref. No. DIN EN 10243-2 : 2000-06 English price group 12 Sales No. 1112 10.00 EN 10243-2 September 1999 ICS 77.140.85 Descriptors: English version Steel die forgings – Tolerances on dimensions Part 2: Upset forgings made on horizontal forging machines Pièces forgées par estampage en acier – Tolérances dimensionnelles – Partie 2: Pièces exécutées à chaud sur machines horizontales à forger Gesenkschmiedeteile aus Stahl – Ma?toleranzen – Teil 2: Warm hergestellt in Waagerecht-Stauch- maschinen This European Standard was approved by CEN on 1999-08-22. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stand- ards may be obtai