04lem的电量传感器技术变频器行业的解决方案.docxVIP

LEM最新的电量传感器技术 ——变频器行业解决方案 2012年7月6日深圳第九届变频器行业企业家论坛 张永刚 内容 1、最新的ASIC技术：HG2 2、最新的磁通量闸门技术：FLUXGATE 1、智能型交互式电流传感器HO系列 2、高性能低成本电流传感器HLSR系列 3、闭环磁通门电流传感器VENUS系列 2 10 July 2012 New O/L ASIC generation : Overview Key parameters : ? Power supply : 3 - 3.6 V and 4.5 - 5.5 V (automatic selection in fixed mode) ? Offset drift and gain drift improvement ? LEM or customer programming : – Possibility to program the range on the customer side = only one reference for the 8 A, 15 A, 25 A – Slow or Fast mode – Level of the reference OUT voltage (Vref OUT) – Over current detection (OCD) – Higher gain to measure lower current (few A) 3 New O/L ASIC generation : Comparison Features Today’s Indus 5 New ASIC HG2 Power supply [V] 4.75 - 5.25 3.0 - 3.6 and 4.5 - 5.5 Gain [V/T] 5.5 - 80 5.5 - 200 Ref OUT voltage [V] 2.5 0.5 / 1.5 / 1.65 / 2.5 Ref IN voltage [V] 1.5 - 2.8 0.5 - 2.65 Response time [ms] 5 2 (fast mode) 5 (slow mode) Over current detection [ms] NA 2 ms Accuracy ~10 %, 16 levels Offset drift [mV/K] at 40V/T 150 (better adjustment) 75 (fast mode) 50 (slow mode) Gain drift [ppm/K] at 40V/T 300 (better adjustment) 150 Noise density [mV/rtHz] at 40V/T 9.5 9 4 Programmable functionalities Parameters which may be changed by the customers : ? Choose between 3 pre-calibrated sensitivities (2 bits) ? Choose reference voltage: 2.5 / 1.65 / 1.5 / 0.5 V (2 bits) ? Choose overcurrent detection in the range 0.3 – 3.7 X Ipn (4 bits) ? Choose one of four output filters (response time) (2 bits) ? Allow or not the ‘device faulty’ indication on Vout for memory contents check (fault = Vout = 0, OK = Vout (@ Ip = 0A) = Vref) (1 bit) ? Switch off the internal reference to reduce the Vref consumption (1 bit) 5 Programmable functionalities : sensitivity (2 bits) ? LEM will calibrate three different sensitivities for example : 8 A, 15 A and 25 A Number of primary turns Range 1 Ipn = 8 [A] Primary current Range 2 Ipn = 15 [A] Range 3 Ipn = 25 [A] Ip [A] 1 8 A 15 A 25 A 2 4 A 7.5 A 12.5 A 2.5 x Ipn