stm32f051r8数据使用指南.doc

STM32F051x4 STM32F051x6 STM32F051x8 Low- and medium-density advanced ARM?-based 32-bit MCU with 16 to 64 Kbytes Flash, timers, ADC, DAC and comm. interfaces Datasheet ? production data Features ■ Operating conditions: – Voltage range: 2.0 V to 3.6 V ■ ARM 32-bit Cortex?-M0 CPU (48 MHz max) LQFP64 10x10 LQFP48 7x7 UFQFPN32 5x5 ■ Memories – 16 to 64 Kbytes of Flash memory – 8 Kbytes of SRAM with HW parity checking ■ CRC calculation unit ■ Clock management – 4 to 32 MHz crystal oscillator – 32 kHz oscillator for RTC with calibration – Internal 8 MHz RC with x6 PLL option – Internal 40 kHz RC oscillator ■ Calendar RTC with alarm and periodic wakeup from Stop/Standby ■ Reset and supply management – Power-on/Power down reset (POR/PDR) – Programmable voltage detector (PVD) ■ Low power Sleep, Stop, and Standby modes ■ V supply for RTC and backup registers BAT ■ 5-channel DMA controller ■ 1 × 12-bit, 1.0 μs ADC (up to 16 channels) – Conversion range: 0 to 3.6V – Separate analog supply from 2.4 up to 3.6 ■ Two fast low-power analog comparators with programmable input and output ■ Up to 11 timers – One 16-bit 7-channel advanced-control timer for 6 channels PWM output, with deadtime generation and emergency stop – One 32-bit and one 16-bit timer, with up to 4 IC/OC, usable for IR control decoding – One 16-bit timer, with 2 IC/OC, 1 OCN, deadtime generation and emergency stop – Tw o 16-bit timers, each with IC/OC and OCN, deadtime generation, emergency stop and modulator gate for IR control – One 16-bit timer with 1 IC/OC – Independent and system watchdog timers – SysTick timer: 24-bit downcounter – One 16-bit basic timer to drive the DAC ■ Communication interfaces – Up to two I2C interfaces; one supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus, and wakeup from STOP – Up to two USARTs supporting master synchronous SPI and modem control; one with ISO7816 interface, LIN, IrDA capability, auto baud rate detection and wakeup feature ■ One 12-