-基于MATLAB的多用户CDMA通信系统设计与仿真.docVIP

设计题目:基于MATLAB的多用户CDMA通信系统设计与仿真 摘要 随着科技的不断发展以及人们生活水平的不断提高,人们对于移动通信的需求不断增长,本文设计了目前流行的CDMA系统,可实现数字信号的扩频解扩与调制解制。本文设计的系统分为单用户通信和多用户通信,二者所用的调制方式不完全相同。以单用户为例,在系统的信源处产生一个数字信号序列,然后对其进行WALSH码扩频,再对扩频码进行调制,然后在信道中加入噪声,最后实现解扩和解调。在本文的最后还对整个CDMA系统进行了优化,设计了其外观界面,将调制方式和原理框图联系到一起,很好的实现了整个CDMA系统的仿真。 关键词:CDMA;扩频;PSK;QPSK;仿真; ABSTRACT With the continuous development of science and technology and peoples standard of living continues to improve, the demamd of mobile communication for people grows continuously, This paper describes the design of the current epidemic of CDMA systems, digital signal spread spectrum modulation and dispreading system solutions. This paper describes the design of the system which is divided into single-user and multi-user communication communication. Two kinds of modulation used in the different ways. A single-user example, the source of the system creats a Department of digital signal sequence, and the system achieve its spread spectrum with WALSH code,then modulates the code of spread spectrum, then joined the channel noise,in the end, peforms the solution to expand and demodulation. At last,in this paper the entire CDMA system optimized design of the interface appearance,makes Modulation and block diagram linked together, achieves good of the whole CDMA System Simulation. Keywords:CDMA; Spread spectrum; PSK;QPSK ; Simulation 目录 1 绪论 (1 1.1CDMA发展史 (1 1.2CDMA的优点及应用前景 (2 1.3论文结构及课题研究内容 (5 2 CDMA系统的总体设计思路 (7 2.1系统总体设计结构 (7 2.2系统的实现原理 (7 3 系统的相关原理及设计过程 (10 3.1MATLAB简介及仿真方法 (10 3.1.1 MATLAB介绍 (10 3.1.2 仿真方法论 (13 3.2扩频技术及其仿真实现 (15 3.2.1扩频技术简介 (16 3.2.2 扩频的仿真实现 (18 3.3PSK调制解调与仿真实现 (21 3.3.1 PSK调制解调原理 (21 3.3.2 PSK的仿真实现 (22 3.4QPSK调制解调及仿真实现 (24 3.4.1 QPSK调制解调原理 (25 3.4.2 QPSK的仿真实现 (26 3.5多用户CDMA通信 (30 3.5.1 DPSK调制解调原理 (30 3.5.1 多用户DPSK仿真实现 (31 4 外观界面设计 (34 4.1GUI (34 4.1.1 GUI和GUIDE (34 4.1.2 使用GUIDE创建GUI界面 (36 4.2主题界面设计流程 (38 4.2.1 仿真原理图的设计 (38 4.2.2 系统界面设计流程 (39 4.3回调函数 (40 4.3.1 回调函数原型 (40 4.3.2 回调函数编程实现各界面互联 (41 5 总结与展望 (43 5.1系统不足与改进 (43 5.2系统升级及展望 (43 致谢 错误!未定义书