ASMESECTIONVBSE-2491-2009 国外国际规范.pdf

2009b SECTION V ARTICLE 23, SE-2491 STANDARD GUIDE FOR EVALUATING PERFORMANCE A09 CHARACTERISTICS OF PHASED-ARRAY ULTRASONIC EXAMINATION INSTRUMENTS AND SYSTEMS SE-2491 (Identical with ASTM E 2491-06) 1 Scope a system is used repetitively without change or substitution. 1.1 This guide describes procedures for evaluating This guide is not intended to be used as a substitute for some performance characteristics of phased-array ultra- calibration or standardization of an instrument or system sonic examination instruments and systems. to inspect any given material. 1.2 Evaluation of these characteristics is intended to 1.7 Required test apparatus includes selected test blocks be used for comparing instruments and systems or, by and position encoders in addition to the instrument or sys- tem to be evaluated. periodic repetition, for detecting long-term changes in the characteristics of a given instrument or system that may 1.8 Precautions relating to the applicability of the pro- be indicative of impending failure, and which, if beyond cedures and interpretation of the results are included. certain limits, will require corrective maintenance. Instru- ment characteristics measured in accordance with this 1.9 Alternate procedures, such as examples described guide are expressed in terms that relate to their potential in this document, or others, may on