核密度仪(德国RGI).pdfVIP

RADIOMETRIC MEASUREMENT OF DENSITY WHY SHOULD DENSITY BE MEASURED ? In many industrial processes knowledge about the density is required - be it specific gravity or bulk density - to draw a conclusion on process parameters. In many instances density is only a measure for other properties: By using density it is possible to determine the concentration of a mix consisting of two materials or the content of solid matter when transported through pipes. DENSITY CAN BE MEASURED CONTINUOUSLY IN RUNNING PROCESSES. WHAT ARE THE CAPABILITIES OF HOW DOES IT WORK ? RADIOMETRIC DENSITY MEASUREMENT ? The result of the absorption measurement An electromagnetic wave called Gamma only is influenced by the average density radiation with the same properties of X-rays between the detector and the source of is weakened according to its density by radiaton. All those parts which are crossed passing through matter . When a fixed by the measuring beam and do not change intensity is know relating to its density, the during operation are included in the ratio to every other density can be calculated calibratetion. Since only the meduim to be according to the intensity it lets pass measured is subject to change, it is possible through. Like an x-ray photograph has its to determine exactly the density. dark parts where the density is higher also It is important that the average density is the intensity of the Gamma-rays becomes used. Thus one can conclude to lower with a higher density. A high accurat other properites from this measurement: determination of the intensity therfore is able specific density,