立体车库主巷道旋转台及小车结构设计.docxVIP

毕业设计说明书 设计题目：立体车库主巷道旋转台及小车结构设计 学生姓名： 学 号： 专业班级： 学 部： 指导教师： 本设计包含说明书及配套图纸， QQ229780692 2010年05月24日 摘要 立体车库是专门实现各种车辆的自动停放及科学寄存的仓储设施。随着城市汽 车保有量的不断增加，停车难问题己经成为大中型城市的一个普遍现象。机械式立 体车库可充分利用上地资源，发挥空间优势，最大限度地停放车辆，成为解决城市 静态交通问题的重要途径。本课题以立体车库主巷道及旋转机构为研究对象，综合 考虑立体车库制造成本和运行效率的双重因素。 本设计旋转台旋转机构使用止推轴承和深沟球轴承对旋转台进行轴向和径向的 固定，保证旋转台运行平稳，并使旋转台旋转过程中台面轴向跳动最大不超过 5mm径向跳动不超过 3mm旋转台使用伺服电机进行驱驱动，保证旋转台停车位置 误差为0.15度，并且能保证轨道的准确对接。 论文以研究工作的进展顺序为序，分章、逐节论述了课题的来源，目的及意 义，设计过程，在设计中遇到的问题与难点及其解决方法与措施。在设计过程部 分，详细论述了总体结构设计、主巷道系统设计、旋转台系统设计。 关键字：立体车库;主巷道;旋转台;伺服驱动 Abstract The three-dimensional garage specifically to achieve a variety of vehicles, automatic parking and scientific storage warehouse facilities. With the increasing urban car ownership, parking difficult problem has become a common phenomenon for large and medium-sized cities. Mechanical three-dimensional garage utilize on land resources, play space superiority, to maximize parking as an important way to solve the static urban traffic problems. Subject to a three-dimensional garage the main roadway and rotary mechanism, the object of study, considering the dual factors of the three-dimensional garage manufacturing costs and operating efficiency. The design of rotary table rotary mechanism using thrust bearings and deep groove ball bearings for rotary table for axial and radial fixed rotary table, ensure smooth running, and the rotary table rotary process of axial runout Max 5mm, radial runout of not more than 3mm; rotary table servo motor drive, guarantees the rotary car park position error of 0.15 degrees, and can ensure the accurate docking orbit Study of the progress of the work order sequence, divided into chapters, each section is discussed in the source of the subject, purpose and significance, the design process, in the design of the problems encountered with difficulties and solutions and measures.In the design process, in detail elaborated the equipment the overall structural design, the main roadway system design, rotating platform system