无油润滑轴承OILLESSBUSHING.docxVIP

SRI01 无油润滑轴承 OILLESS BUSHING SRI010 无油润滑轴承 SRI010 Oilless Bushing  标准 STANDARD ： 德制 DIN1494 国际标准 ISO3547 亚洲标准 国家标准 钢 + 球形青铜粉 + 聚四氟乙烯（ PTFE） Steel+Porous bronze sinter+PTFE SRI010 无油润滑轴承，是以钢板为基体，中间烧结球形青铜粉，表面轧制聚四氟乙烯和混合物卷制而成。它具有摩擦系数小、耐磨、抗腐蚀性好和无油润滑的特点。能降低成本、缩小机械体积、避 免咬轴现象和降低噪音等优点。产品已广泛应用于各种机械的滑动部位 , 例如：印刷机、纺织机、烟草机械、汽车、摩托车与农林机械等。 SRI010 is wall wrapped bushing made of triple layer composites material which be consisted of a steel backing, a sintered porous bronze particles interlayer and calendared and mixture as surface layer, It is of low friction coefficient, anti-wear, anti-corrosion and can be used without oil, or only a trace of oil if needed. Moreover, it is of low cost, low vibration and low noise, compacted and light. It is widely applied in various sliding articles of different kind of machines, such as textile machines, tobacoo machines, hydraulic vechicles, antomobiles, agriculture and forests machinese and so on. 静承载 N/mm 2 250 最高滑动速度 （油润滑） m/s 5.0 Static Max line speed V 最大承载压力 动承载 N/mm 2 140 使用温度 ℃ -195 ～ +270 Load capacity P Dynamic Temp.limit 摇摆运动 N/mm 2 60 摩擦系数 μ 0.04 ～ 0.20 Oscillating Friction Coef. 最大 PV 值 油润滑 N/mm 2· m/s 22 导热系数 W/m·K 13 Oil Thermal conductivity PVlimit 干摩擦 N/mm 2· m/s 3.6 线胀系数 11× 10 -6 /K Dry Linear expansion SRI01T 齿轮泵专用轴承 SRI01T Gear Pump Bushing  + 球形青铜粉 + 聚四氟乙烯（ PTFE） Steel+Porous bronze sinter+PTFE SRI01T 齿轮油泵的高 PV 值工况条件而设计推出的特殊配方产品。产品具有特殊的抗疲劳冲击优点。适应的油泵压力： 16-25Mpa, 线速为度 3.5-5m/s 。产品具有特殊的抗疲劳、抗冲击的优点，在流体 润滑境界下 PV 值可达到 120N/mm 2 .m/s 是各种齿轮油泵、柱塞泵、叶片泵的最佳选择。 SRI01T is composed of a specially designed surface layer of PTFE formulations and is specifically applied for the high PV bushes of gear oil pumps. It is to be used in hydrodynamic or boundary lubricating condition of medium or high pressure gear oil pumps such as P=16-25 Mpa, V=3.5-5m/s. it shows the benefits of low friction coefficient, wear resistant and anti-impact properties. At hydrodynamic lubrication, the PV limit reaches to 120N/mm 2 .m/s.It is a best choice for t