美国船级社标准ABS Steel Vessels Under 90 Meters (295 Feet) in Length RCN10.pdfVIP

RULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH 2006 NOTICE NO. 10 – October 2008 The following Rule Changes were approved by the ABS Rules Committee on 3 June 2008 and become EFFECTIVE AS OF 1 JANUARY 2009. (See /absdownloads/index.cfm for the consolidated version of the Rules for Building and Classing Steel Vessels Under 90 meters (295 feet) in Length 2006, with all Notices and Corrigenda incorporated.) Notes - The date in the parentheses means the date that the Rule becomes effective for new construction based on the contract date for construction, unless otherwise noted. (See 1-1-4/3.3 of the ABS Rules for Conditions of Classification (Part 1).) PART 3 HULL CONSTRUCTION AND EQUIPMENT CHAPTER 2 HULL STRUCTURES AND ARRANGEMENTS SECTION 1 LONGITUDINAL STRENGTH 9 Loading Guidance (1 July 1998) (Revise Paragraph 3-2-1/9.1, as follows.) 9.1 Loading Manual and Loading Instrument (2009) All vessels that are contracted for construction on or after July 1998 are to be provided with a loading manual. Loading instruments are not required by these Rules. However, when fitted, a loading instrument is to be in accordance with Appendix 3-2-A1. ABS RULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH . 2006 1 Notice No. 10 – October 2008 PART 3 HULL CONSTRUCTION AND EQUIPMENT CHAPTER 2 HULL STRUCTURES AND ARRANGEMENTS SECTION 10 KEELS, STEMS, STERN FRAMES, SHAFT STRUTS, AND PROPELLER NOZZLES (Revise Section title as above and add new Subsection 3-2-10/19, as follows.) 19 Propeller Nozzles (2009) 19.1 Application The requirements in this section are applicable for fixed propeller nozzles with inner diameter d of 5 meters (16.4 feet) o