美国船级社标准ABS RCN 9.pdfVIP

RULES FOR BUILDING AND CLASSING ALUMINUM VESSELS 1975 NOTICE NO. 9 – January 2008 (Rev. on 31 March 2008) The following Rule Changes become EFFECTIVE AS OF 1 JANUARY 2008. Notes - The date in the parentheses means the date that the Rule becomes effective for new construction based on the contract date for construction, unless otherwise noted. (See 1-1-4/3.3 of the ABS Rules for Conditions of Classification (Part 1).) Note Regarding the Changes to Section 1 For the 2008 edition, Section 1, “Scope and Conditions of Classification” was consolidated into a generic booklet, entitled Rules for Conditions of Classification (Part 1) for all vessels other than those in offshore service. The purpose of this consolidation was to emphasize the common applicability of the classification requirements in “Section 1” to ABS-classed vessels, other marine structures and their associated machinery, and thereby make “Conditions of Classification” more readily a common Rule of the various ABS Rules and Guides, as appropriate. As a result of this consolidation, those portions of Section 1 which are now included in the generic booklet are deleted or revised as follows. (Add new Foreword to Section 1, as follows.) Foreword (1 January 2008) For the 2008 edition, Section 1, “Scope and Conditions of Classification” was consolidated into a generic booklet, entitled Rules for Conditions of Classification (Part 1) for all vessels other than those in offshore service. The purpose of this consolidation was to emphasize the common applicability of the classification requirements in “Section 1” to ABS-classed vessels, other marine structures and their associated machin