Petrel官方地震解释培训M4_Well_Ties_Synthetics.ppt

Synthetic Seismogram Objectives ? Make Well Section ? Quality check and edit logs ? Create an Estimated log ? Import Check shots ? Correct sonic log and establish Time-Depth relation ? Make Acoustic Impedance log and Reflection Coefficient Series ? Generate Synthetic and Extracted Wavelets ? Produce Synthetic Seismogram ? Compare seismogram with real well seismic ? Manual adjustment and event picking ? Display of synthetic trace in 3D window Make well section 1. Select New well section window from the Window menu 2. Expand the Wells folder and select the appropriate wells 1 2 4. Color fill logs by using the Create/edit curve fill tool 3 3. Expand the Global well logs folder and select the available logs to use 4 Process overview 1. Select wells 1 2. Sonic correction 3. Time/Depth lookup 4. AI log and RC series 5. Generate Wavelet 6. Synthetic Seismogram 7. Correlate Seismic 2 3 4 5 6 7 Log input and QC 1. Input data to Synthetics; Logs: Sonic [ ? s/ft] Density [gr/cm 3 ] Check shots (CS): Check Shot Survey (or) VSP Additional logs (optional): GR [API] Caliper [Hole diameter] Any other 1 2 GR Sonic Density Caliper CS 2. Bad logs must be edited Estimate logs if missing Splice log intervals Manual editing Log editing 1. From Global well logs Right click on DT and select Calculator 1 2 GR Sonic 5 4 2. Make expression Sonic_despiked=DT 3. Use sonic as template 4. Sample MD from log and select DT as input 5. Click Enter 3 Log editing - Despike 1 2 3 4 5 2. Change Action #1 to Despike 3. Use default parameters 4. Run and view the result in well section 5. Undo and adjust parameters if not satisfied 1. From Global well logs Right click on Sonic_despiked and select Log editor Sonic Despiked Log estimation – Make density from sonic 1 2 3 4 5 2. Click on Use existing, select Global Well Log from the list 3. Set Action #1 to Density from Sonic 4. Select Input Log 5. Apply default parameters 1. Right click on the well where an estimated log should be ge