scr脱硝耗氨量计算公式分析说明.pdfVIP

  • 219
  • 0
  • 约1.15万字
  • 约 4页
  • 2020-10-21 发布于中国
  • 举报
SCR 脱硝耗氨量计算公式分析说明 王国平 (天津国华盘山发电有限责任公司, 天津 301900) 【摘要】:文章引用了 SCR 脱硝液氨耗量的一个常用计算公式,对公式的适用范围及条件进行了简单说明, 同时对公式中的各个参数进行了详细的分析。通过某脱硝工程耗氨量的计算演练,并对公式应用的主意事 项加以总结,达到能够在理解公式的前提下正确应用到实际设计计算中。 【关键词】:SCR,液氨耗量,公式,分析 The analysis and author of the liquid ammonia consumption calculation formula of SCR denitration Wang Guo ping (Tianjin Guohua Panshan Power Generation Co. Ltd. ,Tianjin301900 ) 【Abstract 】:The article quoted SCR denitration liquid ammonia consumption in a commonly used formula, the formula of the applicable scope and conditions for a simple description, the formula of each parameter are analyzed in detail. Through a denitration project ammonia consumption calculation of drill, and the formula application ideas are summarized, to correctly understand the formula under the premise of correct application to practical design calculation. 【Keywords 】: SCR, Liquid ammonia consumption, Formula, Analysis 1 前言 算出液氨储罐的容量,液氨储罐的容量宜按 照全厂脱硝系统设计工况下连续运行3 -5天 SCR工艺的基本原理为:在催化剂作用下, (每天24小时)所需要的氨气用量设计,且 向适当温度(约280~420 ℃ ) 的烟气中喷入氨,氨 要求储罐实际液氨储量不能超过罐体容积的 与烟气中NO 发生化学反应,将NO 还原成N 和 X X 2 50 %。 H 0 ,达到脱硝的目的,制备氨的脱硝还原剂有 2 V =Wa×24×d/ρ×2 尿素、纯氨和氨水3种。本文所讨论的耗氨量计 V:液氨储罐容积;d:3 -5天;ρ:液氨密 算公式仅适用于以纯液氨作为还原剂的SCR脱 度。 硝系统。 2) 液氨蒸发器选型。液氨蒸发器蒸发量设 电站锅炉排放的烟气中的氮氧化物统称为 计中,蒸发量为大于Wa 的一个标准规格即可, NOX ,主要成分为NO站95 %和NO2 占5 %,其他

文档评论(0)

1亿VIP精品文档

相关文档