AK09911地磁传感器资料.pdfVIP

AK09911 3-axis Electronic Compass 1. Features  A 3-axis electronic compass IC with high sensitive Hall sensor technology.  Best adapted to pedestrian city navigation use for cell phone and other portable appliance.  Functions:  3-axis magnetometer device suitable for compass application  Built-in A to D Converter for magnetometer data out  14-bit data out for each 3-axis magnetic component  Sensitivity: 0.6 µT/LSB (typ.)  Serial interface 2  I C bus interface Standard, Fast and High-speed mode (up to 2.5 MHz) compliant with Philips I2C specification Ver.2.1  Operation mode  Power-down, Single measurement, Continuous measurement, Self-test and Fuse ROM access  DRDY function for measurement data ready  Magnetic sensor overflow monitor function  Built-in oscillator for internal clock source  Power on Reset circuit  Self test function with internal magnetic source  Operating temperatures:  -30˚C to +85˚C  Operating supply voltage:  Analog power supply +2.4V to +3.6V  Digital Interface supply +1.65V to analog power supply voltage  Current consumption:  Power-down: 3 µA (typ.)  Measurement:  Average current consumption at 100 Hz repetition rate: 2.4 mA (typ.)  Package:  AK09911C 8-pin WL-CSP (BGA): 1.2 mm ×1.2 mm ×0.5 mm (typ.) 2. Overview AK