《隧道及地下工程FLAC解析方法》全部命令流汇总.docxVIP

. 第二章 FLAC3D 原理及入门指南 2-1 定义一个 FISH 函数 new def abc abc = 25 * 3 + 5 End print abc 2-2 使用一个变量 new def abc hh = 25 abc = hh * 3 + 5 End Print hh Print abc 2-3 对变量和函数的理解 new def abc hh = 25 abc = hh * 3 + 5 End set abc=0 hh=0 print hh print abc print hh new def abc abc = hh * 3 + 5 end set hh=25 print abc set abc=0 hh=0 print hh print abc 页脚 . print hh 2-4 获取变量的历史记录 new gen zone brick size 1 2 1 model mohr prop shear=1e8 bulk=2e8 cohes=1e5 tens=1e10 fix x y z range y -0.1 0.1 apply yvel -1e-5 range y 1.9 2.1 plot set rotation 0 0 45 plot block group def get_ad ad1 = gp_near(0,2,0) ad2 = gp_near(1,2,0) ad3 = gp_near(0,2,1) ad4 = gp_near(1,2,1) end get_ad def load load=gp_yfunbal(ad1)+gp_yfunbal(ad2)+gp_yfunbal(ad3)+gp_yfunbal(ad4) end hist load hist gp ydis 0,2,0 step 1000 plot his 1 vs -2 2-5 用 FISH 函数计算体积模量和剪砌模量 new def derive s_mod = y_mod / (2.0 * (1.0 + p_ratio)) b_mod = y_mod / (3.0 * (1.0 - 2.0 * p_ratio)) end set y_mod = 5e8 p_ratio = 0.25 derive print b_mod print s_mod 2-6 在 FLAC 输入中使用符号变量 New 页脚 . def derive s_mod = y_mod / (2.0 * (1.0 + p_ratio)) b_mod = y_mod / (3.0 * (1.0 - 2.0 * p_ratio)) end set y_mod = 5e8 p_ratio = 0.25 derive gen zone brick size 2,2,2 model elastic prop bulk=b_mod shear=s_mod print zone prop bulk print zone prop shear 2-7 控制循环 New def xxx sum = 0 prod = 1 loop n (1,10) sum = sum + n prod = prod * n end_loop end xxx print sum, prod new gen zone brick p0 (0,0,0) p1 (-10,0,0) p2 (0,10,0) p3 (0,0,-10) model elas plot set rotation 0 0 45 plot block group def install pnt = zone_head loop while pnt #null z_depth = -z_zcen(pnt) y_mod = y_zero + cc * sqrt(z_depth) z_prop(pnt, ’shear’) = y_mod / (2.0*(1.0+p_ratio)) z_prop(pnt, ’bulk ’) = y_mod / (3.0*(1.0-2.0*p_ratio)) pnt = zone_next(pnt) end_loop end set p_ratio=0.25 y_zero=1e7 cc=1e8 install 页脚 . 2-8 拆分命令行 new ;example of a sum of many things def long_sum temp = v1 + v2 + v3 + v4 + v5 + v6 + v7 + v8 + v9 + v10 long_sum = temp + v11 + v12 + v13 + v14 + v15 end 2-9 变量类型 new def haveone = 2 = 3