啤酒自动灌装生产流水线控制系统的设计51.docxVIP

本科毕业设计（论文） 题 目 啤酒自动灌装生产流水线 控制系统的设计 学生姓名 崔译丹 学号 201433070001 教学院系 电气信息学院 专业年级 电气工程及其自动化 2014级（双） 指导教师 方玮 职称 讲师 单 位 西南石油大学 辅导教师 职称 单 位 完成日期 2016 年 05 月 19 日 Southwest Petroleum University Graduation Thesis The Design of Automatic Beer Filling Production LineControl System Grade: 2014 Name: Cui yidan Speciality: Instructor: Electrical Engineering and Automation Fang wei School of Electrical Engineering and Information 2016-5 摘要 本文主要介绍的是基于三菱 FX2N-64MR PLC的啤酒自动灌装生产流水线的设 计。该系统的设计包括硬件设计和软件设计，其中硬件设计包括三菱FX2N-64MR PLC 外部电路的设计；软件部分包括程序的设计与调试。 在本设计中，包括自动控制和手动控制，选择适当的清洗机，灌装机，封盖机， 包装机以及光电传感器实现了清洗、灌装、封盖、包装、检测等功能。形成快速一体 的自动灌装系统。本设计中使用了计数器分别对合格品与不合格品进行检测， 并设置 了红灯绿灯便于操作者观察，另外，为了保证系统在出现意外故障时， 能够得到很好 的解决，系统还配置了急停开关等。对于检查出的不合格产品采用推出装置将其移走。 并运用组态王软件实现了对整个自动灌装系统的实时监控，可以更好的了解和调整生 产工艺及控制程序。 关键词：啤酒灌装；三菱FX2N-64MR PLC ;组态王； Abstract This article in troduce The desig n of automatic beer filli ng product ion line con trol system that based on Mitsubishi FX2N-64MR PLC(Programmable Logic Controller Programmable Logic Controller). In my design, it include two parts about hardware and software. The hardware parts include the design of the external circuit of Mitsubishi FX2N-64MR PLC. The software part in cludes the desig n and debugg ing of the program. In this design, including automatic control and the manual control, I select the appropriate clea ning mach ine, filli ng mach ine, capp ing machi ne, packag ing machi ne and photoelectric sensor realized washing, filling, sealing, packaging, testing and other functions. They form an automatic filli ng system with rapid in tegratio n. This desig n using the coun ter respectively for qualified products and unq ualified products were detected, and set up a red light gree n light is convenient for the operator to observe. In additi on, in order to en sure the system in the un expected failure, can get very good soluti on, the system is also equipped with emerge ncy stop switch. To check out the unq ualified products using the launch device to move aw