曲型支架板进行注塑模具设计.pdfVIP

摘要 对曲型支架板进行注塑模具设计,以取代传统的机械加工方法。ABS 由于具有 良好的物理、化学、机械性能，并且易于注塑成型，因此选用ABS 作为注塑材料。将几何 作图法和 Pro/Engineer 软件分析法相结合，运用 Pro/Engineer 软件建立塑件实 体模型，计算出塑件体积、质量和在分型面的投影面积；利用几何作图法初步确 定浇口数目及位置。根据塑件生产要求及结构工艺性分析，采用一模四腔布局， 侧浇口浇注。塑件呈阶梯型，采用两板式注塑模，阶梯型分型面。针对塑件上的 四个孔，采用推杆推出机构，将推杆与型芯设计成一体。对模具总体结构、浇注 系统、推出机构、冷却系统进行了合理的设计，对注塑机进行了校核，形成了一 套完整的模具设计方案。 联系 QQ：598120552 有全套资料 含 CAD 图纸 关键词：曲型支架板；注塑模具；Pro/Engineer Abstract The curved support board was injection molded to replace the mechanical processing method. ABS，which has excellent physical 、chemical and mechanical properties and easy to be injection molded, was selected as molding material. The mold was designed by using geometry diagram and Pro/Engineer software analysis methods. A 3 dimensional model of the part was built with Pro/Engineer software to get the volume and weight of the plastic parts and the projection area on the parting surface. The Gate number and position was first determined applying with geometry methods. According to the production requirements and the structure of the product, a four cavity, side gating system was used. 2-plate mold was adopted. The ladder type parting surface was applied. Based on the four holes in the part, the push rod institutions was used, the push rod and cores was designed as one part. The overall structural system、gating system、push rod institutions and cooling system of the mold were all reasonable designed, The injection machine was also checked, formed a complete mold design. Key words: support board; injection mold ; Pro/Engineer 联系 QQ：598120552 有全套资料 含 CAD 图纸 目录 联系 QQ：598120552 有全套资料 含 CAD 图纸 绪论 曲型支架板是汽车上的零件，起支承作用。目前大多曲型支架板都采用金属 切削加工，成本较大，零件质量大，加工时间长。如果零件用塑件替换，采用注 塑成型，由于塑料成本低，质量轻，注塑成型时间较短，明显优于金属加工方法。 并且，一些工程塑料具有良好的机械和化学性能，甚至可以代替金属材料。 本次设计内容为曲型支架板注