酒瓶内盖注塑模具设计说明书.pdfVIP

容 提 要 本模具为一个红酒酒瓶盖的注塑模具。 设计分为整体装配图设计和所用各零 件的设计。 本设计从实际生产条件出发， 结合相关理论给出了生产此类塑料制件 的模具设计解决方案， 涉及塑料的工艺性能、 模具设计、 以及机械设计等相关知 识。 该产品采用 PE塑料进行注塑成型 , 成型方式为一模四腔。该设计根据产品 材料和结构特点，对产品进行了工艺性分析 , 选用了合理的注射成型工艺参数， 确定了所需的和成型设备模具的总体结构 , 同时对模具的细节部分进行了结构设 计和一些必要的尺寸计算和强度校核此外， 论文还对分型面、 浇注系统、 脱模机 构、成型部件和温度调节系统进行了分析设计， 最终完成了产品的三维实体造型、 二维零件图和装配图，以及加工工艺规程。 Abstract This is the injection plastic mould ,which is the cover of one kind of wines. It inclouds installing drawing and parts of the total drawing ,under the circum stance of real produce mert and associated with referring theory knowledges such as the properties of plastic mould design, manchining manufacture, design of machinery,the designives one general kind of solution about manufacturing of plastic products by mould. The product is injection molded through PEplastic, and the formation way were four mold cavities. The design analyze the products process, determine the plastics process parameter and injection-molding machine, determine the molds overall plan ,analyze and solve the molds overall structure and each working parts concrete structure, and carry on someessential size calculation and intensity examination. In addition, the design also analyze the parting surface 、the gating system 、 the mold emptier and the temperature control system, complete the three-dimension model and two-dimension assembly drawing of the product. Finally, the processing flow char of core. To here, the design have completed each work which was requested by the mold design. 目 录 容 提 要 Ⅰ Abstract