TOC约束理论PROTOCOLSPECIFICATION设备对接协议.pdf

TOC 约束理论 PROTOCOLSPECIFICATION 设备对接协议 V2.00 - November 8, 1999 Husky Machine Operations Husky Host Interface Protocol Specification HUSKY MACHINE OPERATIONS HUSKY HOST INTERFACE PROTOCOL SPECIFICATION This manual describes the interface between a Husky Injection Molding Machine with the Husky Host Interface option and the Host system. An overview of the system and a detailed command set are given. This manual is issued by the Systems Software Group. Page ii SPECIFICATION SUBJECT TO CHANGE November 8, 1999 SPECIFICATION SUBJECT TO CHANGE Husky Injection Molding Systems Ltd. Machine Operations 560 Queen Street South Bolton, Ontario, Canada L7E 5S5 Husky Machine Operations Husky Host Interface Protocol Specification REVISION RECORD Revision Date Comments 1.00 1994 12 Initial Release. 12 1.01 1995 4 Added text data variable support, reformatted. 11 1.02 1995 5 Cleaned up per MD, SPC II and Tandem updates. 15 1.03 1995 7 Restored reference to RFC 1179 for printing. 28 2.00 1998 4 Updated for G-Line, added Event Function, updated 17 variable list, much cleanup. 2.01 1999 10 Added Status Function. 12 2.02 1999 11 Change references to “Alarm” to “Cycle 08 Interruption” Page iv SPECIFICATION SUBJECT TO CHANGE November 8, 1999 Contents 1. INTRODUCTION