3000字英文翻译材料.docVIP

PAGE PAGE 2 外文翻译 1, PLCs basic concept PLC (Programmable Controller) is a member of the family computer is designed for industrial control applications made. Early called the programmable logic controller PLC (Programmable Logic Controller), referred to as PLC, it is mainly used to replace relay logic control to achieve. As technology advances, the devices function has been greatly exceeded the scope of logic control, therefore, today, the device known as programmable controllers, referred to as PC. However, to avoid a personal computer (Personal Computer) short confusion, it will be referred to as PLC Programmable Controller 2, PLCs basic structure PLC is essentially a specialized in industrial control computer, the hardware is basically the same micro-computer, the basic form is: a, power supply PLCs power in the whole system plays an important role. If you do not have a good, reliable power supply system is not working, so the manufacturer of the PLC power supply design and manufacture of very great importance. General AC voltage fluctuations in the +10% (+15%) range, you can not take other measures to PLC directly connected to the AC line to b central processing unit (CPU) Central processing unit (CPU) is the PLCs control center. It is given in accordance with the functions of PLC system programming from the programmer to receive and store the user program and data type; check the power supply, memory, I / O and timer alert status, and can diagnose the user program syntax errors. When the PLC put into operation, the first to receive it to scan the scene state of the input devices and data, and were deposited in I / O image area, and then one by one from the user program memory read user program, after explanation by the command provisions of the Directive the result of logic or arithmetic operations into the I / O image area or data registers. So all of the user program is finished, and finally I / O image area of the output within the state or the out