电气安全中英文培训PPT课件.pptVIP

* * * Avoid accidental starting. Don’t hold fingers on switch button while carrying a plugged-in tool. Tag damaged tools: Do Not Use. Hazards of portable electric tools: - Currents as small as 10 mA can paralyze, or “freeze” muscles: person cannot release tool. - Tools are held tightly, resulting in longer shock exposure. - Power drills use 30 times as much current as what will kill. * Grounding is a secondary method of preventing electrical shock. Grounded electrical systems are usually connected to a grounding rod that is placed 6-8 feet deep into the earth. Grounded - connected to earth or to some conducting body that serves in place of the earth. Grounded, effectively (Over 600 volts, nominal.) Permanently connected to earth through a ground connection of sufficiently low impedance and having sufficient ampacity that ground fault current which may occur cannot build up to voltages dangerous to personnel. Grounded conductor. A system or circuit conductor that is intentionally grounded. Grounding conductor. A conductor used to connect equipment or the grounded circuit of a wiring system to a grounding electrode or electrodes. * * * Crane 起重机 Ladder梯子 Scaffold脚手架 Backhoe挖掘机 * * Reference 1926.405(b)(1) Conductors entering boxes, cabinets, or fittings. Conductors entering boxes, cabinets, or fittings shall be protected from abrasion, and openings through which conductors enter shall be effectively closed. Unused openings in cabinets, boxes, and fittings shall also be effectively closed. Covers and canopies. All pull boxes, junction boxes, and fittings shall be provided with covers. If metal covers are used, they shall be grounded. In energized installations each outlet box shall have a cover, faceplate, or fixture canopy. Covers of outlet boxes having holes through which flexible cord pendants pass shall be provided with bushings designed for the purpose or shall have smooth, well?rounded surfaces on which the cords may bear. * Hazard – Expo