智能车灯设计-电子信息.docxVIP

毕业设计（论文） 题 目 智能车灯 学生毕业设计（论文）原创性声明 本人以信誉声明：所呈交的毕业设计（论文）是在导师的指导下进行的设计（研究）工作及取得的成果，设计（论文）中引用他（她）人的文献、数据、图件、资料均已明确标注出，论文中的结论和结果为本人独立完成，不包含他人成果及为获得重庆工程学院或其它教育机构的学位或证书而使用其材料。与我一同工作的同志对本设计（研究）所做的任何贡献均已在论文中作了明确的说明并表示了谢意。 毕业设计（论文）作者（签字）： 年 月 日 重庆工程学院本科生毕业设计摘 要 PAGE II 摘 要 本文首先介绍了有关智能车灯控制系统的研究目的、国内外发展的现状，在研究中发觉在夜间行车过程中，对前方道路情况的情况不明确，是否有障碍物？再加上驾驶员频繁切换远近灯光，加重了夜间行车的疲劳感，致使交通事故的发生率呈上升趋势，针对这些现象设置了一个智能化的车灯系统。然后再分析了智能车灯的系统：硬件部分，对单片机以及各个模块进行分析；软件部分，依据功能实现的要求设计流程图，并利用Keil4相关软件对程序进行编写和调试，直到实现该功能，同时通过一系列的模拟实验进行验证，并记录下当时的各种模拟环境与数据，方便后续的改进。对于设计的优点以及其局限性进行了阐述，方便形成一个对比，还有在后续就设计的局限性进行一个改进。最后，针对本系统的设计再进行了一个总结。 关键字：车灯自动切换 STC89C52RC 光照传感器 超声波测距 重庆工程学院本科生毕业设计ABSTRACT ABSTRACT Firstly, this paper introduces the research purpose of intelligent vehicle lamp control system and the development status at home and abroad. In the study, it is found that in the process of driving at night, the situation of the road ahead is not clear, and whether there are obstacles? In addition, drivers frequently switch far and near lights, which aggravates the fatigue of driving at night, resulting in an upward trend in the incidence of traffic accidents. To address these phenomena, an intelligent vehicle light system is set up. Then the system of intelligent car lamp is analyzed: hardware part, microcontroller and each module are analyzed; software part, flow chart is designed according to the requirement of function realization, and Keil4 related software is used to write and debug the program until the function is realized. At the same time, a series of simulation experiments are carried out to verify the function, and various simulation environments and data at that time are recorded. Facilitate subsequent improvements. The advantages and limitations of the design are elaborated, which is convenient to form a comparison, and there is an improvement on the limitations of the design in the future. Finally, the design of this system is summarized. Keywords：Automatic