ab触摸屏中文文本显示.pdfVIP

。 1. 首先，如果使用的是 FT6.0 以上的人机界面软件，就必须通过 U 盘或者 CF 卡将字库文件拷贝到触摸屏中。如何拷贝呢？您 需要在 U 盘（有时会不认 U 盘，请多试几个 U 盘）或者 CF 卡中根目录下建立一个名字为 ”Fonts ”的文件夹，然后将字库文件 拷贝到这个目录下， 然后插入人机界面后面的插口中。 在人机界面中， 点击“Terminal Settings ” File Management“ ” Copy“ Files ” Copy Fonts“ ” External Storage 1/2“ ” 选中字体文件，然后选择“ Destination ”是”Internal Storage ”. 2. 在 Rsview Studio 中下载字库 simsun_2_50.ttc 到 PVC ， 3. 在 Configuration Mode, 进入 Terminal Settings/Font Linking. 4. 发现列表中 Arial font. 5. 点击 Show Links 键 . -可编辑修改 - 。 6. 点击 Edit Link 键 . 7. 浏览 main font, 在列表中选择 Simsun. 8. 点击 Add Font 键 . 53463 - Max PanelView Ethernet Connections to MicroLogix How many PanelView Standard / PanelView Plus / PanelView Component can be connected to the Ethernet port of a MicroLogix controller? While the practical limit is two PanelViews per MicroLogix 1100 , it is possible to go up to: 3 PanelView Plus connected to the ML1100. This is due to the connection limitations. Each PanelView Plus can potentially use five connections. The MicroLogix 1100 supports 16 incoming connections and 16 outgoing connections. 3 PanelView Standard will work just fine with the Ethernet port on the ML1100. PanelView Standard can use up to four connections. Although you can use up to four PV standard, if you use all four, you will not be able to get online via Ethernet as all of the possible connections would be used. The PanelView Component consumes one Ethernet connection, but the practical limit is 2:1: 2 PVc per MicroLogi