与法律有关的文章1.docVIP

与法律有关的文章 情势变更原则初探 作者 : 陈冰芳 [ 内容提要 ] 情势变更原则是以诚实信用原则为理论依据发展而来的一项原则，该原则对解决合同履行中因情势变更而导致的不公平现象具有不可为其它制度所代替的独特作用。情势变更原则虽然在我国现行法律中未明确规定，但其与现行法律所规定和倡导的诚实信用原则一脉相承，诚实信用原则应作为情势变更原则的一项基本理论依据。除此之外，情势变更原则与不可抗力规则、显失公平规则既有联系和相似之处，同时又有许多根本的不同。总之，情势 变更原则的生根发芽需要中国市场经济提供较好的经济基础和人文环境。 b5E2RGbCAP and performance test copies of the record. If necessary, review should be carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... Tube wall thickness (mm) 2-3 4-6 7-10 weld form no slope mouth weld strengthening height weld width b (mm) 5-6 7-6 has slope mouth weld strengthening height h (mm) 1.5-2 2 weld wi