SYNCHRONIZATION OF EXTERNAL ANALOG MULTIPLEXERS WITH THE DS AD CONVERTERS外部模拟多路复用器与DS-AD转换器的同步.pdfVIP

® SYNCHRONIZATION OF EXTERNAL ANALOG MULTIPLEXERS WITH THE ∆Σ A/D CONVERTERS By Bonnie C. Baker 1 Many of the delta-sigma Analog-to-Digital converters in stage continually samples the input signal and changes it to Burr-Brown’s product line come in pairs, where one is a a steady stream of ones and zeros. The stream of ones and single channel differential input converter and the second is zeros is then sampled and brought into the digital filter a four channel differential input converter. This is true for section in a FIFO manner. The digital filter implements a the ADS1210 and ADS1211. The ADS1210 has one differ- moving average algorithm on block of the bits contained in ential input, where the ADS1211 has four differential inputs its registers. The results of the digital averaging calculation (as shown in Figure 1). Another similar pair in the Burr- is presented at the output of the A/D converter as one Brown product line is the ADS1212 (one differential input) conversion. The digital filter that is designed in the ADS1210, and the ADS1213 (four differential inputs). In the case of the ADS1211, ADS1212, and ADS1213 is a third order FIR ADS1211 and ADS1213, the four channel input capability is