新产品开发整体流程介绍.pptxVIP

C-System Introduction will cover Role Responsibility (RR) Process Cx Stage: C0: Proposal phase 構想階段 C1: Planning phase 規劃階段 C2: RD Design phase 設計階段 C3: Lab Pilot Run phase 樣品試作階段 C4: Eng Pilot Run phase 工程試作階段 C5: PD Pilot Run phase 試產階段 C6: Mass Production phase 量產階段 Role Responsibility   Function Responsibility PM 產品經理- Product Manager (或計畫專案經理- Project Manager)為所負責計畫或產品線成敗之總負責人, 將依產品線之性質指定專人負責某類產品,必須對所負責產品線專業領域之發展及行銷雙方面皆有相當程度的了解. 並依照產品之條件及市場狀況,做適當的運用,訂定技術或產品市場競爭策略,並在適當的時機推出適當之技術或產品. TM TM is responsible to coordinate technical issues conflict among HW, SW, ID and ME and decision-making. TM has to handle all project technical issues. PCC 為規劃推廣、連絡及控制專案進行的負責人, 掌握專案進行之情況以協助處理異常狀況, 使新產品能順暢切入工廠且如期推出, 以提高產品競爭力. 協助 RD RELEASE 開發階段 BOM CHANGE NOTICE. RD RD 包括電子部門及工業設計部門,若只寫 HW (Hardware Design) 則指電子部門,若只寫 ID (INDUSTRIAL DESIGN) 則指工業設計部門; 包括ME, Thermal, Packing design. 若只寫 SW (Software design) 則指軟體設計部門有負責 BIOS, Driver 及 Pre-load 不同工作性質之軟體開發功能. RD 人員負責產品之開發、設計、測試規劃，包括 H/W、S/W及ID的開發、設計、提出新發明及著作權揭露書. - Wistron Case Role Responsibility   Function Responsibility HW (Hardware Design) * Hardware is responsible for Electronic Engineering Design * Co-works with S/W and QT to make sure that the every function works well according to spec. * H/W should conduct technical transfer to PE. * H/W should input, update, and maintain the bugs/issues information in the bug tracking system. SW (Software Design) * Software is responsible for the design of BIOS, Driver, Utilities, and S/W Preload. * S/W co-works with H/W and QT to make sure that every function works well according to the specification. * S/W has to release the SCD and the Cert. Team Document. * S/W should conduct technical transfer to TE. * S/W has to input/update/maintain the bugs/issues information in the bug tracking system. ID/ME (Industrial Design/ Mechanical Engineering) * ID/ME is responsible for Mechanical Engineering, Thermal and Packing designs. * ID/ME should conduct technical transfer to PME. *