钢结构施工方案.docxVIP

钢结构施工方案 钢结构施工方案 Construction Procedure for Steel Structure 1.1 概述 General 1.1.1 工程概况 Project Introduction 上海乙烯裂解装置安装工程标段Ⅰ共有钢结构约 5819 吨，主要工程量详见表 1.1-1， 包括装置内区域间管廊结构、设备框架结构、设备附属结构及其它零星结构，主要钢结构 全部由 H 型钢柱和钢梁构成，采用大六角头高强度螺栓连接。 There is total 5819 tons steel structure in Shanghai ethylene cracking plant installation work package I. The main amounts of works please see the following table 1.1-1. It includes pipe rack between units of project, steel support frames for equipment, accessory steel structure of equipment other little structural steel. All the main steel structures are made of H-shape columns and beams. They are connected by heavy hexagon steel bolts and nuts. 钢结构工程量一览表 表 1.1-1 序号 项 目 单位 数 量 备 注 1 设备框架、管廊结构 吨 4994 2 设备平台、梯子 吨 748 3 高强螺栓 吨 77 4 防腐 吨 4084 5 防火 吨 910 合 计 吨 5819 框架、平台及螺栓 Schedule of Amount of Steel Structure Works Table 1.1-1 No. Item Unit Amount Note Steel support frame for 1 equipment and pipe Tons 4994 rack 2 Platforms of equipment Tons 748 and stairs 3 High-tensile bolts and Tons 77 nuts 4 Preservation Tons 4084 第 1 页第 1 页 钢结构施工方案 5 Fire prevention Tons 910 Total Tons 5819 Frame, Platform Bolts 钢结构安装工程的主要工作内容包括材料检验、构件预制与安装、构件防腐与防火施工以及焊缝无损检测等。 The main works of structural steel installation include materials inspection, member prefabrication, member preservation and fire prevention and NDT of welding etc. 本工程实行工厂化作业，钢结构预制将根据合同条件及、建设单位的要求全部在施工 生产暂设的结构加工场区进行；安装施工时，根据结构柱基础移交进度情况，统筹安排钢 结构预制安装进程，总体原则是：优先进行管廊结构的安装，后进行钢框架的安装，对妨 碍大型设备运输、吊装的钢结构可依据现场进度情况适当推迟，以确保乙烯裂解装置总体 进度计划实施。管廊结构的安装，拟利用 50 吨～270 吨等不同等级的吊车将预制合格的构 件逐件吊装完成；设备框架的安装，如设计与安装条件许可，拟在其安装位置就近预制成 片或箱形的单元结构，利用大型吊车整体安装。 Factorial fabrication shall be taken in this project. All the prefabrication works of steel structure will be carried out at our steels structure fabrication workshop. The installation works of steel structure will be carried out according to the turning over condition of foundation. The prefabrication and installation works of steel structure will be given an overall consideration