本科毕业设计论文--fsc赛车气动换挡系统开发.pdfVIP

全套设计（图纸）加扣扣 194535455 摘要 本文以 2014 年 FSC 赛车为实际载体，满足中国大学生方程式赛车大赛规则为 要求，以及对赛车快速换挡和提高比赛成绩的需要，提出了 FSC 赛车气动换挡系统 的开发方案。 HUAT-4 号赛车的气动换挡，利用 CATIA 软件对赛车气动换挡执行机 构及手动离合机构的三维虚拟设计及装配，再根据建好的是三维模型对执行机构及 离合机构在赛车模型上进行空寂布置，选择最佳的设计来提高赛车的空间布置合理 性和轻量化。利用 MATLAB/Simulink 模块对气动换挡操作系统进行简易的虚拟仿 真，验证该系统的稳定性。这项研究对于今后的车队队员更深一步的设计非常有指 导性的意义。 关键词 ：FSC 赛车；三维虚拟设计；气动换挡；虚拟仿真 I 全套设计（图纸）加扣扣 194535455 Abstract This article is based on the 2014 FSC racing to the actual carrier ，according to the rules of China automobile formula competition requirements, as well as the needs of the rapid shift in order to improve the performance for the car, it have putted forward development plan of the FSC racing pneumatic shifting system. On the basis of the 2014 car, using CATIA software which it is 3D virtual design for the racing ’pneumatics shifting and manual clutch, under the condition of meet the rules to choose the best design to improve the cars space layout. At the same time, we carried on the design of the actuator, meeting the strength requirement and as far as possible be lightweight. Using the MATLAB/Simulink module which carried out the simple virtual simulation of the pneumatic shift system, and it has verified the stability of the system. The study is also very instructive significance for the racing team ’s design in the future. Keywords: FSC Racing; 3D Virtual Design; Pneumatic Shifting System; Virtual Simulation II 全套设计（