激光焊接工艺实践论文基于模糊灰色理论PA6GF5进气歧管焊接方案的优选.pdfVIP

Vol.43 No.12 (Sum.284) 理论与研究 December 2015 DOI:10.15925/j.cnki.issn1005-3360.2015.12.004 文章编号： （ ） 1005-3360 2015 12-0039-04 基于模糊灰色理论PA6/GF5进气歧管焊接方案的优选 Optimization of the Welding Method of PA6/GF5 Intake Manifold Based on Fuzzy-Gray Theory 1 2 1 2 孔茗 ，邱福明 Kong Ming , Qiu Fuming - 1 苏州工业职业技术学院，江苏苏州 215104 2 苏州市吴中区能达电力电器设备厂，江苏苏州 215106 - 1 Suzhou Institute of Industrial Technology, Suzhou 215104, China 2 Suzhou City Wuzhong District Nengda Electric Power Equipment Manufacturing Factory, Suzhou 205106, China ●摘 要： 塑料代替金属在汽车制造行业得到了广泛应用，同时塑料焊接技术也在不断发展。在实际生产中，每一种 焊接方式都有自身的优势与不足，如何合理选用显得尤为重要。选用焊接方案时，需要考虑的因素很多，而 且焊接方案的合理与否，本身就是一个模糊的概念，很难精确划出界线进行区分。本实验以PA6/GF5进气 歧管为研究对象，基于模糊灰色理论对预选的焊接方案进行综合评价，力求找出其中的最优方案。 ●Abstract ： Plastic replaced metal in the automotive manufacturing industry has been widely used, plastic welding technology is also developed continuously. In actual production, each kind of welding method has its own advantages and disadvantages, how to use it is very important. When selecting welding scheme, there are a lot of factors to be considered, and the reasonable welding scheme is a fuzzy concept, it is difficult to distinguish the boundary. Taking PA6/GF5 intake manifold as the experimental object, the selection of the welding scheme was evaluated based on the fuzzy-gray theory, and the optimal scheme was found out. ●关键词： 模糊灰色理论；塑料焊接；方案优选 ●中图分类号： TQ320.674 ●文献标识码： A ●Key words ： Fuzzy-gray theory; Plastic welding; Scheme optimization 随着汽车制造向着轻量化、美