下穿黄河盾构隧道管片衬砌结构受力特征模型试验（历史学毕业论文）.docVIP

下穿黄河盾构隧道管片衬砌结构受力特征模型试验（历史学毕业论文） 文档信息 属性： F-0181HV，doc格式，正文15280字。质优实惠，欢迎下载！ 适用： 作为文章写作的参考文献，解决如何写好实用应用文、正确编写文案格式、内容摘取等相关工作。 目录 TOC \o 1-9 \h \z \u 目录 1 正文 1 搞要 2 关键字：水下盾构隧道；砂卵石地层；管片衬砌；模型试验 2 1 工程概况 5 2 试验方案 5 1）围岩材料 6 2）管片衬砌 7 3）管片衬砌环向主筋 7 4）管片接头 7 3 试验结果及分析 10 4 结 论 15 参考文献 16 论文原创声明（模板） 21 论文致谢（模板） 21 正文 下穿黄河盾构隧道管片衬砌结构受力特征模型试验（历史学毕业论文） 搞要 摘要：摘要：?对兰州地铁穿河段盾构隧道穿越强透水砂卵石地层和承受较高外水压的特点，首先研制了外水压加载装置，该装置在衬砌模型内部创造了一个封闭的负压环境，通过控制模型内外气压差来实现外水压的等效加载，同时结合隧道地层复合模拟试验系统开展了几何相似比为1∶10的室内模型加载试验，实现了土压和水压的分别控制加载.研究了水压、土压、土体侧压力系数及拼装方式对管片受力特征的影响.研究结果表明，随着水压的增大，管片轴力明显提高，弯矩略有减小，偏心距则明显降低；随着隧道上覆土压的增大，管片衬砌结构的轴力、弯矩、偏心距均呈增大趋势，但总体上量值变化较小；在水压一定时，覆土厚度的增加对管片弯矩的影响越来越大，而轴力变化速率均比较稳定；正常水压条件下，随着土体侧压力系数的增大，管片衬砌结构的轴力增大，弯矩减小，偏心距减小，随着水压的增大，侧压力系数对于管片结构受力特征的影响越来越小；错缝拼装情况下，管片内力在部分环向及纵向接头处会产生较大突变，且管片内力较通缝拼装情况大 关键字：水下盾构隧道；砂卵石地层；管片衬砌；模型试验 中图分类号：U452 文献标志码：A 文章编号：1674-2974（2017）05-0132-11 Abstract：The shield tunnel of Lanzhou metro undercrossing the Yellow River was driven under through high permeability sandy cobble stratum and under high water pressure. A device for external loading test was therefore developed， which introduced a controllable air pressure between the linings and grouting layer， and by regulating the pressure difference， the equivalent water pressure can be then simulated. Using this device together with a tunnel-ground simulation facility， a model test with a geometric similarity ratio of 1∶10 was conducted. The device can reach the point that the water pressure and earth pressure were controlled separately. The mechanical characteristics of segment lining with different external water pressures， soil pressure， coefficient of side earth pressure and segment assembling methods was analyzed. The results suggest that， as external water pressure increased， a significant increasing trend of axial force and a gentle decrease trend of bending moment were observed while eccentricity decreased obviously； as soil pressure increased， a gentle increase of axial f