500KV变电站电气部分设计.docx

500KV变电站电气部分设计 This paper expatiate on the part of 500kV electrical substation design.With the development of science and technology in China, particularly computing technology has advanced, the power system demands on substation moretraditional design and control mode, to adapt to the modern power system, modernization of industrial production and the development trend of social life. The transformer substation that is designed this time is the key position transformer substation of 500kV. It is the hub of Substation.500 kV substation control system is characterized by higher reliability requirements, the object of control, and control of the object distance and the amount of control cable, and require a high level of automation and anti-jamming problems.The design is refer to the part of 500kV electrical substation design. Whole book primarily contain，calculation of power load，reactive power expiation，location of electric station and choice transformer and design the main wiring and short-circuit calculation and choice and test of electric equipments and the design of protective relays and the design of preventing thunder, etc.KEY WORD Substation EHV 500kV第一章绪言 (1)第一节超高压变电站进展概况 (1)其次节选题目的 (2)第三节背景和意义 (2)第四节 500KV设计变电站简介 (2)其次章 500KV变电站选址、负荷统计及计算 (3)第一节 500KV变电站选址及主要技术特点 (3)其次节 500KV变电站负荷统计表 (4)第三节 500KV变电站负荷计算 (5)第三章主变压器的选择 (6)第一节主变压器的选择原那么 (6)其次节主变压器的选择结果 (8)第四章电气主接线的设计 (8)第一节电气主接线的概述 (8)其次节电气主接线的根本要求 (9)第三节电气主接线的设计原那么 (9)第四节电气主接线的方案选择与确定 (9)第五章短路电流计算 (11)第一节短路故障的危害 (11)其次节短路电流计算的目的 (12)第三节短路电流计算的内容 (12)第四节短路电流计算的方法 (12)第五节短路点确定及短路电流计算 (13)第六章电气设备选择及校验 (14)第一节按正常工作条件选择电气设备 (16)其次节按短路状态校验 (17)第三节母线选择及校验 (18)第四节高压断路器选择及校验 (23)第五节高压隔离开关选择及校验 (26)第六节电流互感器选择 (28)第七节电压互感器选择 (29)第八节绝缘子和穿墙套管的选择 (30)第九节所用变压器及电力电容器选择 (31)第七章变电站防雷及接地设计 (33)第一节变电站防雷设计 (33)其次节变电站接地设计 (35)第八章变电站无功补偿装置的设计 (37)第一节断路器投切无功补偿装置 (37)其次节无功静止补偿装置及配电补偿装置 (38)第九章变电站继电爱护设计 (40)第一节主变压器爱护 (41)其次节 10KV线路爱护 (43)完毕语 (47)谢辞 (48)第一章绪言电力工业是国民经济的重要部门之一，它是负责把自然界供