177-AS1330-2004金属材料—铁素体钢的落锤撕裂试验解读.pdfVIP

AS-1330-2004 TM Australian Standard 澳大利亚标准 Metallic materials — Drop weight tear test for ferritic steels 金属材料—铁素体钢的落锤撕裂试验 1 AS-1330-2004 This Australian Standard was prepared by Committee MT-006, Mechanical Testing of Metals. It was approved on behalf of the Council of Standards Australia on 15 October 2004. 本澳大利亚标准是由 MT-006 金属材料测试委员会编制，并由该委员会代表澳大利亚标准委员会于 2004 年 10 月 15 日批准。 This Standard was published on 1 November 2004. 本标准于 2004 年 11 月 1 日出版。 The following are represented on Committee MT-006: MT-006 委员会由以下单位参加： Australian Railway Association 澳大利亚铁路协会 Bureau of Steel Manufacturers of Australia 澳大利亚钢铁制造局 CSIRO National Measurements Laboratory 澳大利亚联邦科学和工业组织国家测量实验室 CSIRO Telecommunications and Industrial Physics 澳大利亚联邦科学和工业组织 电信和工业物理学研究院 Institute of Materials Engineering Australia Limited 澳大利亚材料工程设计有限公司 National Association of Testing Authorities Australia 澳大利亚国家测试机构协会 Keeping Standards up-to-date 关于标准的更新 Standards are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically reviewed, and new editions are published. Between editions, amendments may be issued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased. 标准是应适时更新的文件体系，反映人们在科学、技术及系统方面取得的进步。为了保持标准的版本最 新，所有标准都应定期进行评审并出版