杜光华无线语音放大系统设计定义.pdfVIP

摘 要 无线语音放大系统由发射和接收两大部分组成。麦克风将声音转换为音频电信号， 经过内部电路的处理后， 将包含音频信息的无线电波通过发射机发射出去。 接收部分通 过天线接收无线信号， 经过内部芯片的处理， 将电信号还原成音频信号， 送到外接设备， 完成音频信号的接收和放大。 本文叙述了基于单片机 80C51 的低功耗无线语音放大系统的设计， 主要做了如下几 方面的工作：一是确定无线语音放大器系统的总体设计；二是确定单片机控制 nRF2401 发射机和接收机的硬件设计；三是进行软件系统的设计。 关键词： 无线语音放大器；低功耗；数字音频功放； nRF2401；80C51 I ABSTRACT Wireless voice amplification system consists of transmitting and receiving two major components. The sound into the microphone audio signals, through the internal circuitry of the processing, will contain the audio information of the radio waves transmitted out through the transmitter. Receiving antenna to receive radio signals in part through, after the processing within the chip will restore the audio signal and sent to external devices, complete the audio signal reception and amplification. This paper describes the low-power 80C51 microcontroller-based wireless voice amplification system designed mainly to do the following several aspects: First, to determine the overall wireless voice amplifier system design; the second is to determine hardware design of determine the nRF2401 transmitter and receiver controlled by MCU; third is the software system design. Keywords: wireless voice amplifier;low power consumption;digital audio amplifier;nRF2401;80C51 II 目 录 摘 要 I ABSTRACTI I 第 1 章 绪论 1 1.1 无线语音放大器系统的选题背景 1 1.2 无线语音通信发展过程 1 1.3 国内外研究现状 1 1.3