镀锌钢板点焊的工艺性能.docVIP

镀锌钢板点焊的工艺性能 Spot Welding Technology of Zinc-Coated Steels 摘　要：为提高镀锌钢板点焊接头的质量，对普通冷轧钢板、电镀锌钢板和两种镀锌层厚度不同的热镀锌钢板进行了一组点焊工艺及接点强度试验，并对试验结果进行了计算机回归分析，分别得出了这几种材料在不同的焊接电流、焊接时间下的点焊熔核直径或接头拉剪强度变化曲线以及点焊飞溅临界曲线.根据对上述试验结果的分析和比较，提出了锌镀钢板点焊时焊接电流、焊接时间和电极压力等参数的选用原则，并对几种镀锌钢板给出了相应的点焊规范范围. 关键词：镀锌钢板；点焊工艺；接头拉剪强度 Abstract： A series of spot welding technology and joint tensile-shear tests for uncoated low carbon, electroplated and two kinds of hot dipped zinc-coated steels were made to improve the quality of spot welding joint for zinc-coated steels. The test results were analyzed with computer regressive method. The effect