基于Zigbee(CC2530)的温湿度上位机监测系统设计——毕业设计.pdfVIP

基于 ZigBee 技术的温湿度远程监测系统设计 学生：陈园（指导老师：吴琰） （淮南师范学院电子工程学院） 摘 要: 针对目前温室大棚农作物大面积种植，迫切需要科学的方法进行智能远程监测 的研究现状，设计出一套温湿度远程监测系统。该系统是有多个采集终端和一 个协调控制器组成。多个终端分别放置不同的大棚内进行实时采集数据，协调 控制器的作用就是将多个采集终端通过无线传输过来的的数据进行分析并和 PC 机连接。 PC机上运行上位机软件实时的监测各大棚的温湿度信息。多个终端和 协调控制器均采用 TI 公司新一代 CC2530芯片；温湿度传感器采用市场上比较 流行的 DHT11；无线传输采用 ZigBee 协议；上位机软件采用 labVIEW编写，并 通过 RS-232与协调控制器连接通信。通过实物测试了 ZigBee 无线传输的稳定 可靠性，丢包率在误差范围内。 温湿度采集有 0.5s 延时时间，满足实时性要求。 关键词 : 终端；协调控制器； DHT11；CC2530；ZigBee ；上位机 Design of Remote Monitoring System for Temperature and Humidity based on ZigBee Technology Student: Chen Yuan(Faculty Adviser：Wu Yan) (college of electronic engineering, Huainan Normal University) Abstract: According to the current situation of the research on the intelligent remote monitoring of greenhouse crops, the research status of intelligent remote monitoring is urgently needed, and a set of remote monitoring system for temperature and humidity is designed. The system is composed of a plurality of acquisition terminals and a coordinated controller. Multiple terminals are placed in different greenhouses for real-time collection of data, the role of the coordination controller is to collect more than one collection terminal through wireless data transmission over the data analysis and PC machine connection. Temperature and humidity information operation software of PC real-time monitoring of the greenhouse on PC. A plurality of terminals and a coordinated controller are used in a new generation of CC2530 chip of TI company; temperature and humidity sensor used on the marke