砼浇筑工序交底.pptxVIP

会计学;1. Formwork;Formwork;Formwork shall be precisely aligned, to ensure concrete structures shape, size and location meet the requirements. Key words: precisely aligned ;Surface of Formwork shall be neat and smooth, joints of formwork shall be tight and keep from leakage, to ensure the appearance quality of concrete. Key words: neat and smooth, joints tightly;Formwork;Formwork;Formwork;Materials and equipment that over weight is not allowed to stack on the formwork and its supports. During process of concreting, condensed mortar should promptly clean up to ensure the surface of formwork are smooth and neat.;In the process of concreting, supervisor shall be on site check, adjust the formwork, in case of any deformation or displacement happened. Stop pouring, if necessary and keep each pouring record. ;In the process of vibrating, vibrators shall be kept from embedded anchor bar, to avoid deformation, if deformation happened, adjustment must be done. ;Removal of formwork before the specs time is prohibited, to avoid improper removal method causing damage at concrete corner and surface. Formwork removal in winter or any cold weather shall meet the temperature requirements.;Removal of formwork shall follow the principle “ remove start from the first installed”, removing shall be in order. Special tool shall be used for formwork removal, to avoid damage to formwork.;Removed formwork shall not be threw casually, to avoid deformation of them. Removed form work, brackets and accessories shall be promptly clean up and keep custody in category. Badly deformed or broken formwork shall not be used and ;Formwork;Formwork;2. REINFORCEMENT;Fabrication and clean. Storage of rebar. Placing of rebar. Splicing of rebar.;REINFORCEMENT;REINFORCEMENT;REINFORCEMENT;REINFORCEMENT;REINFORCEMENT;REINFORCEMENT;REINFORCEMENT;REINFORCEMENT;REINFORCEMENT;REINFORCEMENT;REINFORCEMENT;REINFORCEMENT;REINFORCEMENT;3. CONCRETE PLACING;Concrete Placing ;Concrete Placing ;Concrete Placing ;Con