ABB Pluto网关 Mitsubishi Q PLC集成手册-用户手册.pdf

Original instructions Pluto Gateway Mitsubishi Q Integration Manual English v1B 2TLC172062M0201_B Table of contents: 1  General 4  2  Hardware 5  2.1  Casing 5  2.2  Pluto bus 7  2.2.1  Connecting the Pluto bus 7  2.2.2  Baud rate detection 7  2.2.3  Status LED for Pluto bus 7  2.2.4  Gateway Address Pluto bus settings 8  2.3  Profibus 9  2.3.1  Connecting the Profibus 9  2.3.2  Baud rate Profibus 10  2.3.3  Status LED for Profibus 10  2.3.4  Gateway Address Profibus setting 11  3  Setup in Pluto Manager12  3.1  Selecting the function library 12  3.2  Transmitting from Pluto to Mitsubishi PLC 13  3.2.1  Transmit global data from Pluto 13  3.2.2  Transmit other data from Pluto 14  3.2.2.1  ToGateway_User_A: 15  3.2.2.2  ToGateway_User_B: 15  3.2.2.3  ToGateway_User_C: 16  3.2.2.4  ToGateway_ErrorCode: 16  3.2.2.5  ToGateway_B46_I20_I47: 17  3.3  Transmitting from the Mitsubishi PLC to Pluto 18  3.3.1  Setup External Communication in Pluto Manager 18  3.3.2  Receive Data in Pluto 19  3.3.2.1  Ext_Sig: 19  3.3.2.2  Ext_Val: 19  3.3.2.3  ExtVarBlock: 20  4  Setup in GX Configurator DP21  4.1  Setup the HW Config 21  4.1.1  GSD-file selection and installation 21  4.1.2  Gateway selection and connection 22  4.1.2.1  Configuration options 23  4.1.2.2  Req/Resp of local data 25  4.1.2.3  Additional Data 0-31 25  4.2  Jokab function block library 26  4.2.1  Installation 26  4.2.2  Use 26  4.2.3  Description of function blocks 27  4.2.3.1  Function block - Global data from Pluto (read) 27  4.2.3.2  Function block - Global data from Pluto ASi (read) 28  4.2.3.3  Function block - Global data from Pluto B42 ASi (read) 29  4.2.3.4  Function block - Data to Pluto (write) 30  4.2.3.5  Function block – Additional data –