防静电系统稽查清单.pdf

ESD System Audit Checklist 防静电系统稽查清单 Item ESD System Audit Requirements / 防静电系统稽查要求 Acc Rej N/A There should be visible and clear signs for identification at the ESD sensitive area. / 静电敏 1 感区必须有明显, 清晰的标识。 The ESD protective workstation surface shall be proper grounded /ESD防护工作台面须进 2 行正确的接地。 The equipment and the wrist strap socket used in ESD sensitive area must be proper 3 grounded / 防静电敏感区内, 设备及静电手链插座需正确的接地。 ESD protective workstation should be free from high static voltage generators i.e. vinyl, polyethylene , foam, plastic etc. However, if it is production necessary , steps shall be taken to either:The essential insulator with the field-induced voltage exceeds 2000V, the following steps shall be taken, one is to Separate the insulator from the ESD-sensitive device by a distance of 30 cm, and other is to use ionization to neutralize the charge , If the field exceeds 125 volts/inch in the EPA , steps shall be separate the insulator from the ESD- sensitive device by a distance of 2.5cm (1 inch).or use ionization to neutralize the charge./ESD防护工作台不可有高电压绝缘材料, 如乙烯, 聚乙烯材料, 泡沫, 塑料等. 如果是 生产必须品, 须采取措施 (如果电压大于2000伏需远离静电敏感元器件30CM， 电压大于125 4 伏需远离静电敏感元器件2.5CM或使用离子化将电荷中和). The ESD mat on the workstation / shelf must be clean / 工作站/货架上的防静电席必须洁净 5 。 Package/Transfer / Storage materials shall be accordance with the related ESD 6 requirement . / 包装/转运/存储所用的材料必须符合相关的防静电要求。 The ESD sensitive parts must be protected from the ESD damage during the transportation 7 and storage / 静电敏感元件在转运及存储的过程中必须进行静电防护 。 W hen check ESD wrist strap, shoes and smock by the QA System auditor and passed the 8 checking . /QA稽查员在抽测防静电手链/鞋/工衣过程中是否都通过了测试. W hen ESD sensitive components/PCBA are handled by the operator