YM-WI-PE-044 A2 失效模式分析(FMEA)作业办法(Failure Mode Effect Analysis Operation method).docVIP

文件名称：失效模式分析(FMEA)作业办法 文件编号：YM-WI-PE-044 版本：A2 File name: Failure Mode Effect Analysis Operation method Document No.: YM-WI-PE-044 Version: A2 第 PAGE 10 页 共 NUMPAGES 10页 文件编号Document No. YM-WI-PE-044 版本Version A2 生效日期Effective date 2019/03/16 密级程度Degree of secrets 内部资料Internal data 发放范围Distribution department 工程部、生产部、计划物流部、质量管理部、采购部、技术中心、营销中心 失效模式分析(FMEA)作业办法 Failure Mode Effect Analysis Operation method 编制部门： Writing Department 工程部 拟 制: Draw up 骆懂平 审 核: Check 易志林 批 准: Approve 易志林 修订记录Revised record 修订日期Revision date 版本Edition 修订内容 Content 2018/03/07 A0 首次发行 2018/08/27 A1 修订5.4.3,全文增加英文。 2019/03/15 A2 变更公司名 目的Purpose: 失效模式分析(FMEA: Failure Mode Effective Analysis)是一系统化的方法,用以评估产品在各阶段可能失效的风险.FMEA可确认潜在的失败模式、对客户可能产生之冲击、失效模式发生的可能性、检测及预防失效模式的能力.FMEA的目的在于防范、抑制及持续的改善. FMEA is a systematic approach to assess the risk that products may fail at all stages. FMEA can identify potential failure modes, impact on customers, possibility of failure modes, and ability to detect and prevent failure modes. The purpose of FMEA is to prevent, suppress and continuous improvement. 2. 范围:Range FMEA使用于产品设计开发、产品试产、产品量产三阶段. FMEA is used in the three stages of product design and development, product Pilot run and product mass production. 3. 权责Power and responsibility 3.1 工程部：负责PFMEA培训、设计、验证 Engineering Department: Responsible for PFMEA training, design and verification. 3.2 技术中心：负责DFMEA培训、设计、验证 Technology Center: Responsible for DFMEA training, design and validation. 3.2 各部门：配合工程部执行FMEA Other departments: cooperate with engineering department to implement FMEA 4. 定义:Definition 无NONE 5. 作业内容Operation Contents 5.1 FMEA设计时间:Design time 此阶段将发现产品功能异常、产品寿命缩短及安全危害等失效情形.引起潜在产品失败的因素为设计不良影响客户安全性、满意度或法令规章. At this stage, failure of product function, product life and safety hazard will be found.The factors that cause potential product failures are bad design, customer safety, satisfaction or