喷染喷射机控制系统硬件设计.pdfVIP

本科生毕业论文（设计） 题 目：喷染喷射机控制系统硬件设计 姓 名： 分院、系： 专 业： 级： 学 号： 指导教师： 职称： 月 日 喷染喷射机控制系统硬件设计 喷染喷射机控制系统硬件设计 [摘要] 随着工业的发展，环境污染和能源消耗问题越来越严重，社会对环保的越来越 重视，高污染，高消耗的染整行业改革势在必行。目前染印行业多数使用冷堆前处理工 艺取代传统的前处理工艺以减少前处理污染及消耗。本课题设计的喷染喷射机就是与冷 堆前处理工艺配套的设备。 本文首先对喷染喷射机系统进行了分析与描述，在掌握了其功能与指标要求后对其 硬件进行设计。确定了电机主从级联控制方案。对系统的硬件设计进行了细致的说明， 对系统的软件设计和系统的调试进行简略的说明。最后对系统的远程维护问题进行了讨 论。 本课题设计主要应用了 PLC 控制技术，变频调速技术，现场总线技术和人机交互技术 实现系统在生产过程中的自动控制。 [关键词] 喷射机 节能减排 可编程控制器 变频器 II 喷染喷射机控制系统硬件设计 Jet Dyeing Machine Control System Hardware Design Of Injection [Abstract] With industrial development, environmental pollution and energy consumption problem is getting worse, more and more attention to environmental protection society, dyeing and finishing industry reform is imperative high pollution and high consumption. Technicolor industry currently most cold batch pretreatment process to replace the traditional pre-treatment process to reduce pollution and consumption of pre-treatment. This topic is designed to spray a jet dyeing process before supporting equipment and cold heap. This article first sprayed with jet system is analyzed and described in the control of its function and index requirements after the design of its hardware. The main motor is determined from the cascade control scheme. The hardware design of the system for a detailed description of the debugging system software design and system are briefly described. Finally, remote system maintenance issues were discussed. The design of the main task of the PL