LED驱动安规EN_61347-1_TUV_培训教材.pdfVIP

IEC/EN 61347-2-13 LED Driver IEC/EN 61347-2-13 的驗證要求說明 LED Driver IEC/EN 61347-2-13 的驗證要求說明 . 2011/7/4 1 IEC/EN 61347-2-13 本課程主要內容 IEC/EN 61347 標準介紹 名詞定義 標示 零件要求 結構要求 測試項目 2011/7/4 2 IEC/EN 61347-2-13 IEC/EN 61347 系列標準介紹 一般要求: IEC 61347-1:2007, EN 61347-1:2008 Lamp controlgear- Part 1: General and safety requirements 常用的Part 2 個別要求(Particular requirements) IEC/EN 61347-2-1: for starting devices other than glow starter (Ignitor, Electronic starter) 點火器 IEC/EN 61347-2-2: for d.c. or a.c. supplied electronic step-down convertors for filament lamps) 電子式變壓器 IEC/EN 61347-2-3: for a.c. supplied electronic ballasts for fluorescent lamps 電 子式安定器 2011/7/4 3 IEC/EN 61347-2-13 常用的Part 2 個別要求(Particular requirements) IEC/EN 61347-2-8: for ballast for fluorescent lamps (Winding type ballast) 線圈 式安定器 IEC/EN 61347-2-9: Particular requirements for ballast for discharge lamp excluding fluorescent lamps (Winding type ballast) HID 安定器 IEC/EN 61347-2-10: for electronic invertors and convertor for high-frequency operation IEC/EN 61347-2-11: for miscellaneous electronic circuits used with luminaires IEC/EN 61347-2-12: for Electronic ballast for discharge lamp (HID Ballast) HID 電子式安定器 IEC/EN 61347-2-13: for d.c. or a.c. supplied electronic controlgear for LED modules 照明用LED 電源供應器 2011/7/4 4 IEC/EN 61347-2-13 IEC 61347-1: 2007 EN 61347-1: 2008 Lamp controlgear- General and safety requirements IEC 61347-2-13: 2006 EN 61347-2-13: 2006 Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules 2011/7/4 5 IEC/EN 61347-2-13 IEC/EN 61347-2-13 的應用範圍 電源輸入: ≤ 250 Vdc 或 ≤ 1000 Vac, 50Hz or 60Hz 輸出電壓: SELV SELV equivalent (等效SELV)